YOUR LITSABER ISHERE
Let's get you set up. Videos and step-by-step instructions for every function below. Most people are up and running in under a minute.
POWER ON
SELECT MODE
FIRST DRAWFIRST 30 SECONDS
QUICK START
Three steps. You're hitting it before this page finishes scrolling. Litsaber arrives charged. You can start using it immediately.
3 steps to your first hit
Click the button 5 times quickly to power on/off. Your device turns on in Glowstick Mode by default. The lights stay on while you use it.
Thread on your 510 cart. Hand-tight. If the cart doesn't hit well when fully tightened, back off a quarter to half turn (more on this below).
Litsaber is auto-draw. No button required to hit. The lights animate with your pull.
That’s it. Everything below is optional: modes, voltage tuning, troubleshooting. Use what you need.
QUICK REFERENCE
PRODUCT FUNCTIONS
Every button action in one place. Save this page or take a screenshot.
Everything the device does
| BUTTON ACTION | RESULT |
|---|---|
| 5 clicks | Power on / off. Always opens in Glowstick Mode. |
| 4 clicks | Check battery level. |
| 3 clicks | Cycle voltage: 2.4V → 2.8V → 3.2V. |
| 2 clicks | Pre-heat (9 seconds, any voltage). |
| Single click (in Glowstick) | Cycle through colors (10 options). |
| Hold 2 sec | Toggle between Glowstick and Litsaber Mode. |
| Hold 5 sec | Enter Stealth Mode (lights off). |
| Hold 4-5 sec (in Stealth) | Exit Stealth. Returns to Glowstick. |
LED LIGHT MODES
THREE MODES
Litsaber has three lighting behaviors. The screen cycles between them. Pick what fits the moment.
Glowstick Mode
DEFAULT MODEContinuous glow with breathing effect while you inhale.
This is the default mode every time the device turns on.
LEDs stay lit. They gently “breathe” when you take a hit.
Lights stay on for up to 300 seconds after the last interaction.
Single-click the button to cycle through colors: green → red → blue → yellow → orange → light blue → pink → white → rainbow → red/white/blue.
PRE-HEAT
WARM THE OIL
For thicker oils that need a moment to flow.
Best for distillate, liquid diamonds, or any cart that pulls cold.
Press the button 2 times quickly to start the pre-heat cycle.
The device pre-heats for 9 seconds at low voltage, gentle enough not to scorch the oil.
Pre-heat stops automatically when you inhale or when the 9 seconds complete.
You don’t always need this. Pre-heat is most useful in cold weather, with high-viscosity oils, or with carts that haven’t been used in a while.
VOLTAGE
TUNE FOR THE OIL
Three voltage settings. The LED color tells you which one you’re on. Press the button 3 times quickly to cycle.
BATTERY
CHECK YOUR CHARGE
Litsaber has an 800mAh cell built for a full festival night.
Quick read on how much charge you have left.
Press the button 4 times quickly.
LED segments light up to indicate remaining battery: full to empty.
After 5 seconds, the device returns to your current mode automatically.
Battery specs: 800mAh cobalt cell, 300+ recharge cycles (about a year of festivals), 1.48Wh energy capacity.
Five segments, 20% each. When you check the battery, the segments light up to show your current level. Red is on the button side, green is at the tip.
CHARGING
FULL CHARGE IN 75 MIN.
USB-C. Any cable, any adapter. No proprietary connectors.
The LEDs animate while charging so you always know what’s happening.
Plug in any USB-C cable into a 5V/1A adapter or higher.
LEDs breathe by color segment as the battery fills: red, then orange, yellow, blue, green.
When fully charged, the green segment stays solid and stops breathing.
Not charging? Try a different cable first (many USB-C cables are data-only and won’t deliver power). Then try a different adapter. If neither works, contact us.
Watch the segments fill in order. The green segment going solid means you’re fully charged.
CART TIPS
CART TROUBLESHOOTING
Litsaber is built for broad 510 compatibility. If your cart isn’t hitting well, here’s what to try, in order.
Try the half-turn trick
The 510 connection has a fixed center pin at 4.0mm depth, set for broad cart compatibility. Some carts seat best a little loose. If the cart doesn’t hit when fully tightened, back off a quarter to half turn. This is normal, not a defect. Always try this first.
Try a different voltage
A voltage mismatch is the next most common cause of a weak hit. Thicker oils want more voltage, thinner oils want less. Click 3 times to cycle, and match the oil to the voltage guide above.
Re-seat the cart
Sometimes a cart isn’t making clean contact. Unscrew it, clear any debris off the threads and pin, then re-thread hand-tight. Don’t over-tighten.
Try a different cart
Most weak-hit issues are cart-related, not device-related. If a known-good cart hits fine but another one doesn’t, the issue is that specific cart, not your Litsaber.
SAFETY
SAFE USE
A few things worth knowing.
Mind the temps. Charge and use at normal room temperature. Don’t leave it in a hot car or in direct sun.
510 carts only. Built for standard 510 cartridges, 0.5g to 2g. Don’t modify the device or use it with anything else.
Keep it dry. Don’t submerge it or expose it to liquid. Wipe the threads and contacts clean if they get gunked up.
Built-in protection. Overcharge, over-discharge, short-circuit, vibration, and drop protection are all on board.
Auto shut-off. The LEDs power down after 300 seconds of inactivity to save battery. A quick draw or click wakes it.
Keep away from children. There is no child lock. Store it out of reach.
STILL STUCK?
We’re a small team in L.A. We read every message and reply within 24 hours.